WAKEBOARD/KITEBOARD FINS

Tracker Fins

Home of No Nonsense Wakeboard / Kiteboard Fins

Strong glass filled nylon fins — wakeboard fins, wakeskate fins, kiteboard fins

Save 20-80% on Wakeboard fins, Kiteboard fins and other Fins

Tracker FIN Company (Produced by S.C.C. Inc.) was established in 1998 as an affordable source of Fins for the wakeboard industry.

Whether you are WakeBoarding, KiteBoarding, WakeSurfing, WakeSkating or KiteSurfing, finding one of your fins missing or damaged can be a real bummer, and trying to find a affordable replacement fins can be even more of a bummer. We at Fins4Sale aim to please, we work hard at keeping current styles in stock, ship quick, and try our best to accommodate every order with personal care. Be assured, we want to help you have a great ride.

1/4 20t One Hole Fins

These Wakeboard fins have two super secure and strong molded in locating studs, with one center 1/4 20 threaded hole, all on the standard 3/4 inch centers.Tracker Wakeboard Fin uses single hole mount because on side impact, a fin mounted with one screw is more likely to spin rather than tip over and rip the screws into the board, or worse rip though the board. You can mount single hole fins by simply drilling a 1/4 inch hole in the middle of your two existing holes.

Please measure the length you need (thickness of your board at the mounting) and add at least 1/2 inch (13mm) extra for thread engagement in the fin.

For our single hole 1/4 20T fins, we recommend allen socket screws using a 2 inch long allen wrench.

The single hole fins use “one” 1/4 20T screw per fin.

In most cases, fins have been mounted with either one screw or two screws based on a 3/4 inch (19mm) centers, or 1 1/2 inch (38.1mm) between the locating studs or screws.

If you are not sure about the length, please feel free to contact us with the information of thickness of your board. Then we will send you the correct Screw.

NOTE: Screw and Washer are not included with the fin. If you need them, you must order them. The cost is 95 cents per screw/washer.

Omnitech Engineering